User Tools

Site Tools


dig:lab_3a

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

dig:lab_3a [2013/03/15 06:15]
tobi
dig:lab_3a [2013/03/15 06:16] (current)
tobi
Line 2: Line 2:
  
 In [[:dig:lab_3]] you built a microphone preamplifier and you wrote (or modified) code to control the servo motor. In [[:dig:lab_3]] you built a microphone preamplifier and you wrote (or modified) code to control the servo motor.
-In [[:dig:lab_5]] you will design the schematics of a daughterboard PCB.+In [[:dig:lab_4]] you will design the schematics of a daughterboard PCB.
  
 In this exercise you will start from a working example of the mic-servo program and modify it so that it works even if it is not enumerated by USB. In this exercise you will start from a working example of the mic-servo program and modify it so that it works even if it is not enumerated by USB.
dig/lab_3a.txt · Last modified: 2013/03/15 06:16 by tobi