User Tools

Site Tools


dig:fpga2

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

dig:fpga2 [2016/04/15 10:49]
tobi [Installation]
dig:fpga2 [2017/04/02 07:00] (current)
tobi [Installation]
Line 44: Line 44:
   - For Windows, you do not need to install the Jungo USB drivers or the Xilinx driver since we will use Adept software to install the FPGA configuration over the microcontroller on the BASYS2 board.  You can install the //Digilent Universal Serial Bus Controller//.   - For Windows, you do not need to install the Jungo USB drivers or the Xilinx driver since we will use Adept software to install the FPGA configuration over the microcontroller on the BASYS2 board.  You can install the //Digilent Universal Serial Bus Controller//.
   - We recommend that you run the Xilinx **32-bit Project Navigator**, not the 64-bit version. **Hint: To quickly launch the ISE project navigator from Windows, hit start button and start typing "32-". **   - We recommend that you run the Xilinx **32-bit Project Navigator**, not the 64-bit version. **Hint: To quickly launch the ISE project navigator from Windows, hit start button and start typing "32-". **
-  - You probably don't need the //MATLAB installation for System Generator//.+  - You don't need the //MATLAB installation for System Generator//.
   - If you installed WebPACK, choose "Get free ISE WebPACK license" for the license option.   Or else see the next step.   - If you installed WebPACK, choose "Get free ISE WebPACK license" for the license option.   Or else see the next step.
   - If you installed System Edition, then set your environment variable as follows. If you use linux, then in your .bashrc set the environment variable LM_LICENSE_SERVER. If you use Windows, then from the ISE Project Navigator's //Help/Manage License...// menu item, select the //Manage Xilinx Licenses// tab and set LM_LICENSE_SERVER to the same value shown below. Using the license manager, you also need to copy {{:dig:xilinx_license_webpack_14.7.zip|the license file that is supplied here}} to the right folder so that ISE can later find it.   - If you installed System Edition, then set your environment variable as follows. If you use linux, then in your .bashrc set the environment variable LM_LICENSE_SERVER. If you use Windows, then from the ISE Project Navigator's //Help/Manage License...// menu item, select the //Manage Xilinx Licenses// tab and set LM_LICENSE_SERVER to the same value shown below. Using the license manager, you also need to copy {{:dig:xilinx_license_webpack_14.7.zip|the license file that is supplied here}} to the right folder so that ISE can later find it.
dig/fpga2.txt · Last modified: 2017/04/02 07:00 by tobi